Wouxun KG-UVD1P Manual de usuario descargar pdf (Pagina 7)

To enter Menu Mode: MENU

To exit Menu Mode: EXIT (or wait 5 seconds)

To toggle FM Radio Mode on/off: Side Key 1 (the button immediately below the PTT button. See Section 8.1.1.)

To enter Dealer Mode: see Section 4.5 below.

4.2 Menu Mode

There are 30 menu items, some with numerous choices (parameters). However, for manual repeater programming you need learn only four menu

items (# 16, 23, 24 and 27). Most other menu items are “set and forget” options.

When in Menu Mode the LCD display contains two lines of information – the upper line is the name of the Menu Item (with a flashing menu number

at right) while the lower line is the current or default menu parameter.

To enter Menu Mode: MENU (you will see the menu name, e.g. STEP , followed by a flashing menu number, e.g. 01 )

To select a Menu item: either: 1) press keypad menu number, e.g. 2 1 or, 2) ROTARY to desired menu item

or, 3) press ▲ or ▼ keypad buttons to select desired menu item.

To enter Menu parameter: MENU (the parameter is on the lower line of the LCD menu display. Note the ► arrow.)

To select Menu parameter: either ROTARY to desired menu parameter or press ▲ or ▼ keypad buttons to

select.

To save chosen Menu parameter: MENU

To exit Menu Mode: EXIT (or wait 5 seconds)

Remember that to successfully change a Menu parameter requires three MENU button presses: 1) to enter Menu Mode, 2) to move cursor ► to menu

parameter on lower LCD display line and, 3) to save selected parameter.

4.3 Programming a Repeater Frequency

The user will at least need to know how to manually program a new repeater frequency in the event that a computer and programming software are

unavailable. It is suggested you work through the steps below at least twice, once as shown and a second time with your local repeater details. For

example, to program a VHF repeater having a receive frequency of 146.840MHz, a typical transmit offset of -600KHz, a CTCSS transmit access sub-

audible tone of 103.5Hz, saved to memory channel #25, name that channel “VE7RPT” and then finally delete that channel:

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Sin comentarios

Wouxun KG-UVD1P Manual de usuario Pagina 7