Wouxun KG-UVD1P Manual de usuario descargar pdf (Pagina 9)

Enter Channel Mode: MENU TDR (you should see channel numbers at right side of LCD display)

Select Menu Option 21: MENU 2 1 MENU ▲ (to select CH = channel number, CH FREQ = channel frequency, or NAME

= channel name), MENU EXIT

(There is also a FREQ parameter, to set VFO mode on, but it is easier to toggle using MENU TDR )

4.4.2 Odd Repeater Channel Offsets, Cross-band Settings

Normally, amateur radio repeaters have an rx/tx offset of 600KHz on the 2M band, 1.6MHz on the 1.25M band and 5MHz on the 70CM band. If you

wish to program an oddball offset or otherwise operate cross-band you can directly program such offsets with software or use what Wouxun refers to

as “dis-channel” settings. An example for an assumed satellite with 70CM FM uplink and 2M FM downlink follows:

Toggle to VFO Mode: MENU TDR (there should be no channel numbers at right side of LCD display)

Enter receive frequency on keypad: 1 4 5 9 5 0

Save RX frequency to memory: MENU 2 7 MENU ▲ or ROTARY (until 026 selected), MENU EXIT

(the receive downlink frequency is now saved)

Enter transmit frequency on keypad: 4 3 5 9 5 0

Save TX to same memory position: MENU 2 7 MENU ▲ or ROTARY (until CH-026 selected), MENU EXIT

(the transmit uplink frequency is now saved)

4.4.3 Channel Memories

The radios have 128 standard memory channels and 18 FM radio memories. When programming manually it is important to know what the unused

channels are. Use ROTARY in Channel Mode to check the channel numbers in memory, or enter Menu 27 (MEM-CH):

MENU 2 7 MENU , ROTARY , programmed channels show as, e.g., CH-025 while free unused

channels appear as 025, EXIT

4.5 Dealer Mode

Normally channel information is locked. If you must change channel parameters outside of software or without deleting and recreating a channel then

use Dealer Mode.

Enter dealer mode: Hold down keypad# 8 while turning the radio on POWER SWITCH/VOLUME CONTROL

(you should see 2 lines of 6 underscore characters on the LCD screen)

Release key 8 after beeps

Enter dealer password: 2 6 8 1 6 0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Sin comentarios

Wouxun KG-UVD1P Manual de usuario Pagina 9